I have tried to do computers like the one shown previously, normally as "one-offs" for a particular model, and I only really needed one or at most two to give some interior detail to the factory office.
|The first three stages,(top to bottom)|
Using a strip of scrap card from the factory unit I marked out the size of the screens. I won't be using this card again, it really is rubbish to cut accurately as can be seen by the many torn and ragged bits, despite using a new scalpel.
The resultant framework was glued to a piece of scrap foamboard which when dried had the back layer of card stripped from it and the foam then smoothed out with a file, giving a nicely rounded back to the screens.
|Prototype and bases at the top and examples of the various supports .|
The next two stages were (1) to cut a scrap of mdf (Again from the ever helpful Factory build), file the edge off to a wedge shape and glue it to the back, then (2) glue the whole thing to a small base , which I cut from a better piece of card.
Along the way I filed any rough patches on the screen fronts and generally tidied up the fronts.
The results, whilst not great were sufficiently usable for my needs (to represent computer screens).
|A quick lick of paint|
The overall effect is OK and the build wasn't difficult - just frustrating at times) and I do have another idea to make some more of these, using a different technique and to make them smaller as these could easily double as flat-screen TVs.
|Dividing wall (pretty boring huh?)|
Once more a bit of scrap MDF from the kit served as the dividing wall, cut an filed to fit.
A door was added by merely adding a frame and a scrap of card for the door itself (on both sides I hasten to add). The small amounted of detail that can be seen on the door was added using a craft knife - not unlike the details on the original doors, minus the use of a laser and the windows!
|Two quick scratch-built desks|
|Lots of progress made on this new build.|
to give access to the lower area.
Finally this week I've been making a lot of progress on the second Sarissa Building , their Large Factory Building.
I'm more or less following the same processes as I followed with its smaller brother, so the internal walls will all have 'glass' windows (perspex obviously), the card inserts will all be supplemented with additional card to reach the corners, windows will have lintels and sills on the outside and frames on the inside etc.
The major deviation I made with this build is to assemble the four main walls with their inserts first before and before gluing them to the base they'll be painted.
Currently I've also decided not to add the chimney stack and will be using the building annex it sits on as an yet another office,
That's it for this week and as usual if you've taken the time to look then I hope that there was something here of interest. Comments, as always are welcomed and appreciated.
Nice work, Zab. Now the survivors can watch the show, "How to Trick A Zed Into Lighting UP A Phosphorus Cigarette."ReplyDelete
Thanks Jay, if I could print something like that small enoughe, it would make a good computer headline.Delete
I love those, good work sir!ReplyDelete
Thnks AL,I always find iit strange that even the smallest, sinokest things can please.Delete
These look good Joe, nice one dude (thanks for the link too)ReplyDelete
Thanks dGG, I was truly inspied by your own mass-production of these for your hospital and I do try and give credit where credit is due.Delete
Lovely work Joe! This is exactly the kind of stuff that brings a build to life. And the kind of detail I seem to struggle with the most. Great inspiration as I have three building interiors I need to sort out myself.ReplyDelete
I do hope you're going to document the build of the large factory too.
I find doing interiors a bit of a trail, one of the reasons why I've mass-=roduced things for interiors in the past. I'd obviously forgotten that when I'd made individual computersin the past.Delete
When the large factory is complete I will be giving inights into what I've done, but so far there's been nothing really done differently/ to the smaller one.
That's better progress than most IT departments! Great added details, these will look great on the table I'm sure.ReplyDelete
Thanks N667, I did realise that making a lot of the screens would not take that much more time and would give me a nice little stockpile. They're almost an 'ever=present' in my buildings.Delete
Oh well done and I wish our IT could turn around that many machines and get them working in such a short space of time!ReplyDelete
Thanls Michael, I can empathise as back in the day our IT dept. had a lot of machines constantly out of commisiion, but luckily these only have to look the part.Delete
I really admire your attention to the small, additional details you're adding to the buildings. Top stuff.ReplyDelete
Thanks Roy, I always find it interesting that such simple bits are so easy to make, but I only doit because I can't afford many of the excellent cast itemsavailable.Delete
I have to be honest and say my decision to furnish my wild west buildings was an expensive choice. I wouldn't do it again with any other skirmish type projects. Once is enough for me.Delete
My wild west set-up has all interior furnishing too, mostly scratch-built (as are most of the buildings), but then again there just wasn't anything available thirty plus years ago.Delete
Nicely done. Mind you, that's a lot of monitors; are you planning to build an office with a cube farm :-) ?ReplyDelete
Thanks C6, I'm sure I'llbe making an officein the future or I'll find some use for them to furnish some of the buildings that still need some interior detail.Delete
The computer screens looks great!ReplyDelete
Thanks HW, and so easy to do too.Delete
Bloody impressive, well done and very inspirational.ReplyDelete
Thanks Irqan, maybe not suitable for your current adventure, but maybe a future project?Delete
Brilliant computers. I bet no one has done this before!ReplyDelete
Thanks David, but yes they have (see my link to dGG's hospital build above).Delete
The desks look awesome and Andy at dagobbo is really good I love his terrain. It'll look great once all installed dudeReplyDelete
Thanks Damon, without inspiration from others on the Interweb blogger thingy I doubt I'd get anything done.Delete
I do tend to stockpile bits though for ease in future builds.