The building came about whilst I was watching the England v San Marino football game (it was a really boring first half) and I designed, drew out and cut out the whole thing by the start of the second half. (The second half was better and therefore work stopped on the model.)
The model itself is made of a fairly thin card frame to which has been added some thin crimped card.
I didn't want to risk my newly purloined crimper with the thicker card that I used for the shell of the building
The effect I wanted was that of corrugated iron sheets, so they were all cut to a uniform size (about 50mm x 30mm) and applied to the model.
The rear of the building has a high window as its feature.
The frames for all the windows, door and the upper part of the rear of the building are made from the ubiquitous wooden coffee stirrers.
Both the windows in this model have been "glazed" with clear plastic. (I wouldn't want Van Fampi on my case now would I ?)
The roof was made in exactly the same way as the main shell of the building, card then thin corrugated card on top, but it does have the addition of another thin sheet of card along the ridge; this is meant to represent roofing felt (possibly also known as tar-paper, but don't quote me on it.)
It appears as a fairly uniform grey in the photos, but I blame the crap cameraman for that. It is actually several different shades of grey and has a texture too, created by a small amount of wall filler
The doors are made from - yes, you guessed it - coffee stirrers.
Overall approximate dimensions are
Base: 75mm x 125mm
Height to roof: 50mm
Height to roof ridge: 85mm
I also reinforced the internal corners of the model (coffee stirrers yet again).
Here are two views of the inside of the building.
I had decided early on that I wanted the whole building to appear fairly run-down, both inside and outside, so the inside got a similar treatment to the outside.
None of the walls were actually fully painted in any particular colour, but as i used paints for one thing or another, whatever was left on the brush was wiped off on the inside walls.
The inspiration for a lot of the inside detail came from Zombietown (http://www.skankgame.com/zombietown.html), the sire where I really started my venture into zombie wargaming, even though I was looking for ideas for my then gangster project.
The stains on the floor and the accumulated muck in the corners (dust from filing cork) all add to the overall "lived-in" look.
This next view shows many of the bits and pieces that I used to detail Vic's Gaff.
The shelf has a piece of piping on it, which was cut from a skewer I had used to stir some silver paint with (god know when). On the bench is a book, a newspaper and some "gentleman's reading material", scratch built or left-overs from Nipper's Newstand (March 2012's blog, as is the poster above the bench.
The shelf on the back wall was a piece of card on which there is a box (scrap card) a couple of cylinders, representing rusting paint-tins and some wire mesh which I've used in the past for leaded windows. Underneath the shelf are three more slightly larger cylinders painted in red and yellow (a colour scheme I've seen used on cooking oil in my local cash and carry!) No doubt anyone familiar with WWG products will recognise their tool-box. Not shown in this photo, but fairly visible in a photo above is a sack I scratch built.
A tyre and a broom handle complete the props in this end (broom handle is a cocktail stick and the tyre is from a card racing car toy)
There's not much going on in the other end of the building, a broom and a few bits of wood on the side shown, another tyre and new piece of corrugation are on the other on the other side, they can be seen in one of the photographs above. The brush was inspired by Sid the Sweeper (the foundry figure I've used a lot for scale purposes) and like so many other things it's probably well overscale. It was made from a small piece of cork and a cocktail stick.
Finally here's an aerial view of the building, just to prove that I can in fact get a vehicle in it, even though its a bit of a tight squeeze.
Even with the vehicle in though you can see that there is still room left for figures to fit in, especially as I use 20mm bases (pennies or washers).
In the back of my pick-up truck are some of the sacks, which I scratch built after making the experimental one for this model.
Designing, cutting out, painting, making props and everything else that went into this model probably took no more than five or six hours total, but was spread over six days, so about an hour a day.
That's it for another week then and as always comments are both welcomed and appreciated.
I'll also take this opportunity to welcome my latest follower - "Dark_Jober" to my blog, I hope he and all you others that peruse this site find something to interest or entertain you.
This is smashing mate!!! Well done!ReplyDelete
Really like the detail in this. Broom in the corner and all that!!
Thanks LS,strangely I quite enjoyed both making and detailing this model.Delete
You've completely nailed the "run-down garage" look, congratulations! I think it's the clutter inside that really makes it for me.ReplyDelete
Thanks Colgar, cluttering it up was fun(and much easier than I thought it would be).Delete
That looks bloody brilliant mate! That interior is perfect it actually reminds me of my granddad's garage it a very similar colour made from wood and looked pretty much like the interior but with a Reliant Robin in duck egg blue inside instead.ReplyDelete
Thanks Brummie, I'll have to get a Reliant Robin then...Delete
LOL it just bought back a lot of happy memories, my grandad never had a license for a car just one for motorbikes.Delete
Has someone given you some pics of my shed, because that what it looks like!! You've done yourself proud here Sir, its a work of art!!ReplyDelete
Thanks Ray, my spies are everywhere.Delete
Wow, Joe, you have really surpassed yourself here. It may have been a quick and simple model to make but it looks superb. The interior detail really lifts it a lot and the slapdash construction and paint scheme just adds to its charm. Job's a good 'un, I'd say!ReplyDelete
Thanks Bryan, I really didn't think it had "charm" though.Delete
Yes it does - stacks and stacks!Delete
Hehe, who'd have thought ?Delete
Splendid! I really love it. run down scruffy and all the things a good English mans shed should be. Splendid i tell you sir simply splendid!ReplyDelete
Thanks Clint, I suppose it does really ooze "Englishness"Delete
Fantastic! You've really done a great job with this model Joe and you should be proud of it. Not only that, but you've added to 'things-to-do-with-coffee-stirrers' list as well!ReplyDelete
All that and averted the evil of Van Fampi! As his alter ego said above: "Job's a good 'un"!!
Thanks Colin, "Uses for coffee stirrers", will be added to very soon and I can affirm that it really is best to keep on Van Fampi's good side.Delete
Now that's a beautiful man cave!ReplyDelete
Thanks AL, to scale he's got more space than me too!Delete
Wow, Great! This is amazing.ReplyDelete
Thanks Lord BorjadoDelete
That looks amazing! Well done.ReplyDelete
That is a perfect little garage. Very well done, especially for coming up with it yourself.ReplyDelete
Thanks Adam, I don't know how I came up with it either, I'm not that noted for originality.Delete
Its Rubbish I hate it If you give it to me it might make it amongst my aliens stuff... If I'm nice :-)ReplyDelete
Thanks Wayne. but it's going nowhere.Delete
Beautiful piece, I really like the details, from the broom to the patches of dirt! Good work!ReplyDelete
Thanks Zerloon, detailing the model was fun and not that difficult.Delete