Well, now that the disruptive shift-changes of work in the last two weeks is finally over and my back isn't playing up so much any more things should return to normal.
I, of course. had a very sombre and pious New Year and now that the hang-over has finally cleared I can think about trying to do something to progressing my zombie project.(anything would be a bonus)
These two boards were made in the same way as all my other my terrain boards, namely 4mm (thereabouts) xork pavements and raised areas onto 6mm MDF.
I could use a three inch brush despite my poor eyesight and didn't have to worry unduly about any detail (there isn't any)
The finer detail, such as it was, was achieved by the liberal use of masking tape.
It was sorted out later of course.showed.
The reasoning behind making even more terrain board was that these would feature wider roads.
They're actually twice the width of the roads I've used on the other boards, being 200mm wide rather than 100mm.
They will of course still tessalate with the other boards and with themselves, although the photograph seems to argue against this, it is merely because of the orietation of the boards.
With these two boards I can now have a wide road the length of my eight foot table or a six foot length of road with a wide "T" junction at one end.
I painted the junction road marking differently to my other junctions just for variety.
The boards themselves are 4 foot by 2 foot (1200mm x 600mm). I still have another wide raod section to make, though this will be on 2 foot square board and I also have three other terrain boards, but I've yet to decide what to with them - there's two of the larger variety and one more of the smaller square types. One of the larger boards will almost certainly be some form of green urban terrain,
Looking very good. :)ReplyDelete
Thanks, now to fill out the streets with buildingsDelete
looks great, time to put some terrain and miniatures on and play a game? :)ReplyDelete
Pkayinh a game is a great idea.Delete
Looking superb Zabadak!ReplyDelete
Thanks Brummie, it's time to fill those streets now.Delete
Dashed good sire. Like Mathyoo I can't wait to see it in action.ReplyDelete
Thanks Irqan, you and Mattyoo are not the only ones I can assure you.Delete
That's a nice big gaming board you have there, Joe. I can't wait to see it populated.ReplyDelete
I detect a common theme here among these replies, Iwant to be abe to have sufficient terrain boards and terrain to fill a 2@' x 6' table.Delete
These are going to look so good with buildings and figurs. All your work is bearing fruit. I really am looking forward to seeing these progress.ReplyDelete
thanks Clint and but for comments like your's and everyone else's I may well have given it all up by now.Delete
Very cool boardReplyDelete
How I wanted mine to turn out but it didn't, very nice!ReplyDelete
It really is very easy Fran, you should have a goDelete
A great game board!ReplyDelete
Nice work, the board looks good, and the roads look very well worn, supremo effects.ReplyDelete
Thanks T-Extra,The worn look is helped by me frying drushes off on the roads.Delete
Great work!! I will stole your ideas for my boards :DReplyDelete
Sincerely, your new follower.
Thanks Alvaro, I hope to see them.Delete