![]() |
The whole building |
![]() |
The extra bit |
The major change was that rather than a single building in three parts, I made three separate, but similar, buildings that could be joined to make the one shown.
Of course this entailed getting an additional print of an extra wall I would need to complete one of the three buildings (as luck would have it I did have extra copies of most everything else).
Whilst it may not look it from the photographs, the walls are vertical and don't actually slope off in a multitude of angles.
I was aware of this problem from the start of this build and have often thought about how the height of the model (at about 15 inches) could easily be out of 'true'; consequently I was checking with my trusty set-square constantly!
![]() |
The main, central building |
The roof of the main building had to have a helipad, it was just crying out for one, but the 'problem' came with the addition of the access from the building to the pad itself.
Unfortunately the roof-top access as I had envisaged it (shown below) just looked out of place alongside the helipad, crowding the whole of the roof unnecessarily- it just looked wrong.
Consequently I will be designing and making another roof-top access,
![]() |
Roof-top access |
![]() |
Rear of the main, central, building |
The one regret I do have about this whole central building though is the lazy way I duplicated the original sheet of three floors and merely pasted it above another copy, leaving the darkened band of windows half way up the building, rather than have lighter windows, as in the 'extra bit' shown at the top.
This can be readily seen in the shot below of the obligatory boring side of the main building.
The central building measure about 11"wide by 15" deep and about 18" high.
![]() |
Obligatory boring side bit |
![]() |
The 'Left-hand' building. |
![]() |
The 'Right-hand' building. |
The final part of this build, the right hand building was built at five stories high, more for aesthetic reasons than for any other. I just liked the idea of varying roof heights on this model. The one thing that did come about though was that I 'lost' the middle band of darkened windows, as only the upper part of the extra sheets were used. The building looks much 'cleaner; not having the darkened band n and is far more pleasing to the eye in my opinion.
Again this building wasn't meant to have two entrances, just a pair of fire-escape doors at one end, but with the buildings all being made to be used as separately too a pair of 'front' doors added.
This building is about 11" wide, 9" deep and 15" high.
So, what was the going to be original purpose for this building ?
Perhaps some university campus building ?
Or maybe the start of some inter-city projects ?
Maybe even a high-tech offices featuring labs (Offices of the CDC for example) or some Interweb.com establishment set in pleasant suburbia ?
The only clue I'll give you is the photograph on the right, featuring Sid wondering what the hell a toilet is doing on the roof-top. (It's a TV reference which I'm sure many of you will get).
I've another scratchbuild project in mind (rather than another box-build) but that will have to wait until my last planned scenario is played (oh for someone to throw dice with) and my game-board is cleared. In the meantime though I have roof-accesses to make and air conditioning vents and HVACs to make, so that's it then for this week.
My other blog, which shows my (almost) completed arena for my Gladiator project and can be found HERE
Another very very good building for the city.
ReplyDeleteThanks Clint, it'll make a good backdrop for scenarios, I reckon
DeleteI see your point about the light bands but on the whole is an impressive (modular no less) building.
ReplyDeleteThanks Robert, it never occurred to me to think of it as modular as it didn't start out that way, but you're right and it probably has more 'mileage' being modular.
DeleteThat turned out very well! I love the look of the varying roof heights, that gives it quite a bit of interest. Your roof access hut looks good, but I can understand why it would look crowded with the helipad.
ReplyDeleteGreat job!
Thanks N667, as the basic building are boxes, that only left the roof heights to give it variation. The new roof access design will be considerably smaller and I now got a potential security post!
DeleteWow thats is a huge building.... great work mate!
ReplyDeleteThanks HW, it's not the biggest model I've ever built, but it must be getting close
Delete"That, my friends, is a roof toilet." Great build Joe, so I guess it is going to be used as a hospital although I also like your idea of a university campus.
ReplyDeleteHaha - Michael, you nailed it in one! (I did wonder if I'd get any takers). I do think that this could be a very versatile model the more I think about it.
DeleteDamn fine work Joe! With all 3 parts together the building looks fantastic and the individual parts are just as good!
ReplyDeleteI don't get the TV reference :( ... however, are you implying that it's the hq of the well known industrialist Armitage Shanks? (there's a name to be p*ssed on)
Thanks Colin, I very pleased that it's all but done and dusted and not too far removed fro my initial conception.
DeleteSir Michael (see above) did get the reference and a quick Google search of his quote will get the answer (if you're that bothered.)
Googled and found; never watched that, so not surprising I didn't get it!
DeleteIf you get a chance to watch the series I'd recommend you do so asap!
DeleteThese large buildings do look impressive, but I wonder about storage space. Did you consider making them collapsible, or so that they nested inside each other?
ReplyDeleteThanks C6, I a;ways intended to play on a 6 foot by 8foot table, which would need large buildings to fill, hence the larger sizes I tend to go for.
DeleteI mis-calculated the sizes on the build and had fully intended that they'd nest inside one another (due to changin wall sizes to accomodate windows), but two do nest and the other will have another building nested inside.
Nice work Joe! That could easily be Evil Corp's(e) HQ. You'll have to tell me the TV reference, I don't get it.
ReplyDeleteThanks Bob, yes you're so right about 'Evil Corp" too. something I'd never thought of, even though my "Genecorp Advance Medical Pharmacies" could do with one!
DeleteGreat job Joe. Its certainly a good size. Job well done I say :)
ReplyDeleteThanks Simon, I'd agree but for a couple of easily fixed hiccups along the way.
DeleteGreat job Joe
ReplyDeleteTThanks SK, it all adds to the ;'big city'.
Delete