Welcome to my blog, the story of my continuing journey into the World of Zombie Wargames.

Monday 7 March 2016

Factory Offices (MDF3)

Undercoated building.
Unfortunately last week I was unable to work on my MDF factory building for more than a couple of sessions as real-life once more intervened and a long weekend away was the order of the day.
Nevertheless I did manage to maintain some enthusiasm for this project and worked a couple of extra hours in an effort to not lag too far behind from my target of "an hour a day" on my wargaming projects. I've also managed to fall behind on perusing and commenting on other blogs and will have to make an effort to "keep up".
The first order of business was to undercoat the building, pretty easy using a cheap grey spray (Paoundlandbargainworld special)., or so I thought.  After the initial coating the model  needed a second coat as I'd forgotten how much MDF likes to soak up paint.
Two hours of work, framing out six door pieces.
Whilst awaiting the spray to try I turned my attention to the inside walls of the building, namely the four card inserts with their laser-cut 'detailing', namely the windows and doors. I wanted to make a little more effort with this detailing and to continue adding a few more features to make this more of my own take. I'd therefore need to split a lot more coffee stirrers(to get slimmer pieces). This is of course a thankless task and card strips would have been an equally good solution and probably a lot simpler.   A straight edge, two clamps to keep the stirrers in place, a cut across the corner of a board (else the clamps get in the way) and a bit of patience is all that needed to get a lot of split stirrers, some of which are actually usable as is. I do this all by eye and consequently get a lot of very slightly different thicknesses of stirrer and some very uneven cuts - I'm sure card wouldn't be as difficult. Some filing and sorting of different widths later I had enough bits to get on with cutting and gluing the various bits in place.
As the large doors required a little more effort, due to their diagonal cuts, so  I worked on these first. The windows were the next to consider. I really wanted to have some perspex in them to represent glass and had to decide which wall these would be placed on - inside or outside facing ?
View of the inside  with invisible perspex in place
Paper strips added to corners
I plumped for the inside and realised that once the perspex was in place there would be no was to paint the frame parts, so consequently the frames had to painted first. Although it's not immediately obvious the window-pane frames have all been painted in the photographs, the colour I opted for being very close (but not quite) to the colour of the card being used and having to have an additional coat because, like MDF the card used likes  to soak up paint. The inside will have simple frames to hide the edges of the perspex I use. and whilst the nine individual windows and the two doors each had perspex cut to fit, the two long strips of strips each had a single piece of perspex. The latter will not be so obvious once a few bit of frame are added. 
 I was a bit unhappy with the very obvious corner 'joins' that I find the most obvious clue to a model being MDF and their least attractive feature in my view.
So, like the stairs, I hid these behind a folded strip of paper and luckily where the stairs met the building there was enough of a gap to slide the paper in. 



Base coat with camera flash being used


As time was really against me I finished off this week's work with a quick splash of colour on the outside that would be the base colour . Unfortunately the photographs don't really show the true base colour as it's coffee coloured, but this won't matter much when the lighter sandy tones are added.
The current true colour of the model is probably somewhere between the two.
Without the camera flash




You can just about see that there is a band of colour round the inside top of the building as this is the parapet above the roof and is outside. The inside walls of the building have all be left with just their undercoat for the moment.  
This week's plan is to finish off the framing, inside and out, now that the perspex is in place and, time permitting, getting some paint on the stairs and ventilation stack (which I'm now unhappy with btw).
All of which will leave the middle floor and roof to consider, both of which have their own 'quirks' to circumvent.
A final note, I'm sure that many of you, either those that have this model or something similar, will be wondering why it take me so long to just put together such a simple build even considering the bits I've added. Well, the simple answer is  I don't really enjoy making models, whether they be kits or simply gluing on arms a legs to a plastic figure and I really don't  painting them either!
The only enjoyment  I get from this sort of task is when they're finished and the implied promise that I may get to play with them.

That's it then for another week with the hope that it does generate some interest and that there will be some more progress next week.

21 comments:

  1. It might be taking you a while, but it is certainly looking good Joe.

    ReplyDelete
    Replies
    1. Thanks Michael,the end is not in sight but I am making some, albeit slow, progress.

      Delete
  2. All the extra touches you're adding will certainly make this building a great piece for your gaming table. Nice work so far :)

    ReplyDelete
    Replies
    1. Thanks Tamsin, I really do want a building that's not identical to all the others, so I'm hoping the little extras willacheive this

      Delete
  3. Well, it kept you from getting bored. As you say, putting in the graft now will pay out rewards later.
    It looks great to my mind.

    ReplyDelete
    Replies
    1. Thanks Roy, but I get bored making these things too, but it does pass the tim away. I'm hoping that it'll be a good wargaming piece though when it is finished.

      Delete
  4. hehe, I guess I can always rely on you ro raise a smile on my face. I like playing games (though solo leaves me cold), after all, that's the purpose of wargaming with the inhereant interaction between players, rules discussion and bragging rights after a good game.

    ReplyDelete
  5. I'm the same with painting any piece of scenery Joe!

    ReplyDelete
    Replies
    1. Thanks for the support AL, I knew I wouldn't be alone.

      Delete
  6. The extra effort will be worth it in the end Joe, I get impatient making terrain but love playing on a rich table full of character...

    ReplyDelete
    Replies
    1. Thanks dGG, I'm sure it will be worth it too. I;ve always played on very basic tables in the past and I do want something more subsatntial now.

      Delete
  7. Looking good. I like the idea of using paper to hide the corner joint. This will be a very nice addition to any table, I can't wait to see it in a game!

    ReplyDelete
    Replies
    1. Thanks N667, I've often used paper orveyr thin card to hide all sorts of mistakes on my other models too. I'd like to see this model in a game too (or just a game).

      Delete
  8. Things take time Joe, as long as you're happy with the final result, that's all that really counts??

    ReplyDelete
    Replies
    1. Thanks Ray, though I do have a habit of looking back at what I do and reckon I could always have done it better! At this stage I do wish I'd just assembled the damn thing as it was.

      Delete
  9. While you may not actually enjoy the making you always do a good job and add extras which always seem to improve the buildings.

    ReplyDelete
    Replies
    1. Thanks Clint, it goes with the old attitude of "If a job's worth doing etc." I guess. I also think that having a blog makes everyone step there game up, which is probably a good thing.

      Delete
  10. Its looking good and finding the time is hard with life revolving around us

    ReplyDelete
    Replies
    1. Thanks Damon (and welcome), finding time to do anything is always difficult.

      Delete
  11. Coming on nicely, if not a particularly quick build.

    ReplyDelete
    Replies
    1. Thanks C6m slow but steady progress, all my own fault really for not just gluing the thing together as it was.

      Delete