Pages

Saturday, 30 June 2012

Zombie Fodder (and a sore finger).

I'm the victim of a sore finger, brought on by over-enthusiatic card modelling.
This last week I've been cutting out windows for three shops (they're all joined into one street hence they were easier to do together). Total number of windows is about 64, but each has an inside and outside sheet and each window has two panes to it for a grand total of over 250 cut-outs.  This doesn't include the doors of course; what is it with modern buildings that they gave to have glass doors  - it was much easier when they were all planked wood !
When my finger returns to something resembling normality I'll be carrying on with my card-building exploits.  In the mean time I've been putting some finishing touches (on computer) to the design stage of my next card model project.
Painting continues apace; I'm still trying to finish off my MegaMini civilians of which another three are shown here on the right.  The guy on the left is from their Thugs pack, whilst the others are from one of their civilian packs.
I'm guessing that I'm about half-way through finishing off all the civilians from this manufacturer and currently I'm painting up their civilians and zombie counterparts.
The three figures on the left (again all MegaMinis) are all female, though the jury is still out on her to the right.
The two left-hand figures are both using mobile phones (cell phones for our friends across the pond), but due to my usual inept photography skill it may not be that apparent. 

The obvious shadow across the face of the centre figure is something I'll have to address in the future, but I'm still on Photography 101.
There are quite a lot of female figures in the MegaMinis range which is a good thing and they also probably have one of the largest ranges of children in their mix too.
The  photograph on the right shows three more of their civilians, although the left-hand figure is actually from their pack "Bureau". The figure itself has (had) probably one of the wierdest head positions that I've ever seen as can been seen from the  photograph on the left taken direct from MegaMinis site.  What she has in her left arm still remains a mystery to me, I had it as a bunch if flowers, a baby and a coat, but none of these fit closer inspection  of the mystery bundle.  Some judicious use of padded pliers put her head in a much more acceptable (to me at least) position.

Here's the last two of my finished MegaMini females and they are two of my favourites.
It's a pity that my photography skills don't do them justice, but it does help when covering up my less-than brilliant paintjobs I guess.
The figures themselves are self-explanatory, a shopper and a woman with child, nothing new there as these poses can be found in other ranges (qv. Black Cat Bases), but there are some features that I particularly like about this pair.
Firstly the disparity in height  should be fairly obvious and secondly the "build" of them. The woman on the left is probably what I'd call a "standard" type for a figure, medium height, medium build etc. whilst her colleague on the right is taller and more heavily built, which all adds to the attractiveness of the sculp for me.
My last two offerings are both Hasselfree miniatures,  a company, which sadly, I've never had dealings with directly, although my son has nothing but praise for them and their service. These two were gifts from my son to me along with several other figures.  When I was considering buying from Hasslefree these two would certainly have been on the list, along with lots of their other excellent sculpts.  However when I considered that for the price of these two I could purchase about six MegaMinis figures, I had no choice (being the skinflint that I am).
Again this is an excellent example of diversity in figure heights and builds (as with many of Hasselfree's figures) and in this case also of age.  Grandma will be a welcome edition to my growing collection of older survivors (read zombie-fodder).
The tall elegant starlet is obviously the survivor who trips on her high heels and having no lines to read, continually screams (read zombie fodder). I did have to make a very minor repair to my "starlet" as part of her left arm between her elbow and wrist was missing, hopefully its hardly noticeable now.

Soon I hope to have some actual zombies and their civilian counterparts to show but in the meantime I do of course welcome and appreciate all your comments.

If you're new to my site and I haven't already welcomed you, then "Welcome", I do hope that you find something to interest you here.

21 comments:

  1. That's a nice collection of civvies there, Joe. The two HF figures stand out for sheer quality, but that's probably why they cost more (although not for you). I do agree with you about your two favourite ladies from the Mega Minis range.

    ReplyDelete
    Replies
    1. Thanks Bryan, I'm notthat sure about the quality of Grannie, her head is a little large, but I still like the figure.

      Delete
    2. They are sold by Hasslefree but not all there figures are sculpted by Kev, Ebob I think did all the Hazmat troopers and rumoured to be doing more

      Delete
    3. Kev sculpted the Grannie, and Andrew Rae sculpted the tall/thin female (I checked on their site) :)

      Delete
    4. Thanks for that Rovanite, I didn't realise that Hasslefree had several sculptors working on their figures.

      Delete
  2. great work you are certainly productive. Have you tried a white background? I use to pieces of A4 put together then the paper is folded in half, then open it and take photos that way not quite a box but you get the idea

    ReplyDelete
    Replies
    1. Thanks Brummie, I've tried lots of different backgrounds and techniques, my quest for better photos goes on, but it's not top of the priority list !

      Delete
  3. Lots of holes to cut, hehe. But in the end, I am sure it will be worth it.

    As for the misterious item, it might be a dog, perhaps? Thats what it seems like from here, at least :D

    ReplyDelete
    Replies
    1. Yep, lots of holes and all to do again when I glue the sheets to the walls. The mystery item isn't a dog. if only it was.

      Delete
  4. Well the price one must pay to be in this hobby....

    Hope for a speedy recovery to the thumb!

    ReplyDelete
    Replies
    1. I'm almost ready to face the next episode of torturous cutting !

      Delete
    2. While I hope you do progress....Do take care mate!

      Delete
  5. Nice looking figures. My usual cutting problems is slicing off bits of skin, which I obviously had no further use for. Keep it up I'm looking forward to seeing the results.

    ReplyDelete
    Replies
    1. Thanks Irqan, I'm also prone to slicing and dicing my fingers but I heal pretty fast too.

      Delete
  6. Sounds like we can expect some some cool buildings soon. Hope your hands are ready soon. Nice paintjobs there. I didn't realize how important civilians were until I went up against the terrified civilians in some of the Day One scenarios. You've got a nice assortment there. I like your Thug with the lead pipe, nice improvised weapon. Your last two Mega Minis ladies are my favorites, though. Especially the Pregnant lady carrying the baby.

    ReplyDelete
  7. Hey, thanks LJ, buildings soon ? - Yes - Cool ? -we'll see. I never thought of the woman with child as being pregnant, but now you mention it...

    ReplyDelete
  8. The worst thing I've found about cut fingers when assembling card buildings is the danger of getting bloodstains on the printed parts ... and yes, I've done it :(

    I've always cut the windows out AFTER sticking them to the card/foambaord - probably due to laziness, but I've also found that no matter what I did, if I cut out the windows before sticking to the building material, the inside window and outside window never quite line up ...

    Also, it's very admirable that you are cutting out individual panes! I've never done that; I cut the entire window out and plan to put clear plastic (mainly from blister packs, as I seem to have a whole pile of that!) with wooden bits (sashes, etc) drawn on with a CD pen - but never quite managed to get that far ...

    With my latest builds, I've decided to leave the windows as printed

    ReplyDelete
    Replies
    1. Yes, CM, I've done both and bloodied many a model, I hadn't really thought this whole thing out as I'd have planned window tranparencies making the whole thing easier - but I'm still learning.

      The last thing I want after my last card-building disaster is to have Van Fampi on my case.

      Delete
  9. QUOTE: "With my latest builds, I've decided to leave the windows as printed."

    Van Fampi will have something to say about that, Colin!

    ReplyDelete
    Replies
    1. I thought he would, so I've decided his next appearance will be with 2 dozen zombies, no ammunition and American style manacles and leg irons fitted to him ... ;)

      Delete
    2. Boys, boys, please play nice.

      Delete